OSPF and OSPFv3
359
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure the OSPF Interface
To configure the OSPF interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > OSPF >
Advanced > Interface Configuration
.
6. Use one of the following methods to select an interface:
• In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the
Go button.
To Next Page
Loading...
