NETGEAR M4300 - Configure Ospfv3; Configure Basic Ospfv3 Settings

OSPF and OSPFv3
378
M4300 Series and M4300-96X Fully Managed Switches User Manual
10. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure OSPFv3
Configure Basic OSPFv3 Settings
 To configure the basic OSPFv3 settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > OSPFv3 > Basic > OSPFv3 Configuration.
Table 137. NSF OSPF Summary
Field Description
Restart Status The restart status of OSPF Helper feature. The possible values are as
follows:
• Not Restarting
• Planned Restart
• Unplanned Restart
Restart Age (seconds) The amount of time since the last restart occurred.
Restart Exit Reason Displays how the master unit on the switch last started up. The possible
values are as follows:
• Not Attempted. Graceful restart was not attempted.
• In Progress. Restart is in progress.
• Completed.
The previous graceful restart completed successfully
.
• Timed Out. The previous graceful restart timed out.
• Topology Changed
. The previous graceful restart terminated
prematurely because of a topology change.