Multicast Routing
408
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. In the Admin Mode field, select the Enable or Disable option to set the administrative
status of multicast forwarding in the router.
The default is Disable.
7. Click the Apply button.
Your settings are saved.
The following describes the nonconfigurable information that is displayed.
Configure the Multicast Interface
To configure the multicast interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > Multicast > Interface Configuration.
Table 150. Multicast Global Configuration
Field Description
Protocol State The operational state of the multicast forwarding module.
Table Maximum Entry Count The maximum number of entries in the IP multicast routing table.
Protocol The multicast routing protocol presently activated on the router, if any.
Table Entry Count The number of multicast route entries currently present in the multicast
route table.
To Next Page
Loading...
