NETGEAR M4300 - Configure Authentication Lists; Configure a Login Authentication List

Manage Device Security
501
M4300 Series and M4300-96X Fully Managed Switches User Manual
11. Click the Add button.
The server is added to the switch.
Configure Authentication Lists
The switch supports various authentication lists.
Configure a Login Authentication List
A login list specifies the authentication methods to be used to validate switch or port access
for the users associated with the list. The preconfigured users, admin and guest, are
assigned to a preconfigured list named defaultList, which you cannot delete. All newly
created users are also assigned to the defaultList until you specifically assign them to a
different list.
Two default lists are present: DefaultList and networkList.
 To configure a login authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Management Security >
Authentication List > Login
Authentication
List.
6. T
o create a new login list, enter the name in the List Name field.
The name can be up to 15 alphanumeric characters long and is not case-sensitive.
7. In the columns in table header (1, 2, 3, 4, 5, 6), select the method to appear first in the
selected authentication enable list.
The options are as follows:
- Enable
.
The privileged EXEC password is used for authentication.