Manage Device Security
533
M4300 Series and M4300-96X Fully Managed Switches User Manual
11. Use Users to select the user name for the selected login list for 802.1x port security.
12. Use Login to select the login list to apply to the specified user.
All configured login lists are displayed.
The Authentication List field displays the list that
is used by 802.1X.
13. Click the Apply button.
Your settings are saved.
Configure Port Authentication
You can enable and configure port access control on one or more ports.
To configure 802.1X settings for the port:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Port
Authentication >
Advanced > Port Authentication.
Note: Move the horizontal scroll bar at the bottom of the page to view more fields.
6. Select the check box next to the port to configure.
You can also select multiple check boxes to apply the same settings to the selected
ports, or select the check box in the heading row to apply the same settings to all ports.
7. For the selected ports, specify the following settings:
• Control Mode. Select an option for the control mode. The control mode is set only if
the link status of the port is Link Up.
The options are as follows:
- Force unauthorized. The authenticator port access entity (P
AE) unconditionally
sets the controlled port to unauthorized.
To Next Page
Loading...
