Configure Switching Information
262
M4300 Series and M4300-96X Fully Managed Switches User Manual
7. In the Static MAC Address field, type the MAC address.
8. Select the VLAN ID associated with the MAC address.
9. T
ake one of the following actions:
• Click the Add
button.
The static MAC address is added to the switch.
• Click the Delete button.
The static MAC address deleted from the switch.
Port Settings
You can view and monitor the physical port information for the ports available on the switch.
Configure Port Settings
You can configure the physical interfaces on the switch.
To configure port settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > Ports > Port Configuration.
6. In the Port column, select the check box for one or more ports or LAGs.
7. From the STP Mode menu, select the Spanning
T
ree Protocol administrative mode for the
port or LAG.
The possible values are as follows:
• Enable. Enables the Spanning T
ree Protocol for this port.
• Disable. Disables the Spanning T
ree Protocol for this port.
The default is Enable.
To Next Page
Loading...
