NETGEAR M4300 - View and Clear Ipv6 MLD Traffic

Multicast Routing
450
M4300 Series and M4300-96X Fully Managed Switches User Manual
If the entry exists, it is displayed as the first entry, followed by the remaining entries.
• Select Group from the menu, enter the MLD group IP address, and click the Go
button.
If the entry exists, it is displayed as the first entry, followed by the remaining entries.
An exact match is required.
7. To refresh the page with the latest information on the switch, click the Update
button.
The following table describes the nonconfigurable information that is displayed.
View and Clear IPv6 MLD Traffic
 To view and clear IPv6 MLD traffic:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
Table 174. IPv6 Multicast MLD Groups
Field Description
Interface The interface for which data is to be displayed.
Group IP The address of the MLD members.
Last Reporter The IP address of the source of the last membership report received for this
multicast group address on the selected interface.
Up Time The time elapsed in seconds since the multicast group was known.
Expiry Time Time left in seconds before the entry is removed from the MLD membership
table of this interface.
Filter Mode The filter mode of the multicast group on this interface. Possible values are
Include and Exclude.
Version 1 Host Timer The time remaining until the router assumes that there are no longer any
MLD version 1 hosts on the specified interface.
Group Compat Mode The compatibility mode of the multicast group on the interface. The values
it can take are MLDv1 and MLDv2.
Source Hosts This parameter shows source addresses that are members of this multicast
address.
Source Address (Expiry Time) This parameter shows expiry time interval against each source address
that is a member of this multicast group.
This is the amount of time after
which the specified source entry is aged out.