EasyManuals Logo

NETGEAR M4300 User Manual

NETGEAR M4300
704 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Configure System Information
44
M4300 Series and M4300-96X Fully Managed Switches User Manual
8. Configure the Falling Threshold.
Notification is triggered when the total CPU utilization falls below this level for a
configured period of time.
The falling utilization threshold must be equal to or less than the rising threshold value.
The falling utilization threshold notification is made only if a rising threshold notification
was done previously. Configuring the falling utilization threshold and time period is
optional. If the Falling CPU utilization parameters are not configured, then it takes the
same value as Rising CPU utilization parameters.
The range is 1 to 100.
9. Configure the Falling Interval.
The utilization monitoring time period can be configured from 5 seconds to 86400
seconds in multiples of 5 seconds.
10. Configure the CPU Free Memory Threshold value in KB.
11. Click the Apply button.
Your settings are saved.
View and Clear Switch Statistics
To view and clear the switch statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Management > Switch Statistics.

Table of Contents

Other manuals for NETGEAR M4300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4300 and is the answer not in the manual?

NETGEAR M4300 Specifications

General IconGeneral
ModelM4300
Form FactorRack-Mountable
LayerLayer 3
StackableYes
ManagedYes
MemoryVaries by model
Flash MemoryVaries by model
WarrantyLifetime
PortsVaries by model (24 or 48 ports)
PoEAvailable on some models
Port Speed10/100/1000 Mbps, 10Gbps on uplinks
Forwarding RateVaries by model
Jumbo Frame SupportYes
VLAN SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, 802.1X
DimensionsVaries by model
WeightVaries by model
Operating Temperature0° to 50° C (32° to 122° F)
Power SupplyInternal
Uplink PortsVaries by model (SFP/SFP+ or 10G SFP+)

Related product manuals