Multicast Routing
409
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. Use one of the following methods to select an interface:
• In the Go To Interface field, enter the interface in the unit/slot/port format and click on
the
Go button.
• Next to the Interface column, select the check box for the interface that you want to
configure.
7. Enter the TTL Threshold below which a multicast data packet is not forwarded from the
selected interface.
Enter a number between 0 and 255. The default is 1. If you enter 0, all multicast packets
for the selected interface are forwarded.
Y
ou must configure at least one router interface
before you see this field.
8. Click the Apply button.
Your settings are saved.
Configure Global Multicast DVMRP Settings
To configure global multicast DVMRP settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> Multicast > DVMRP > Global Configuration.
To Next Page
Loading...
