NETGEAR M4300 User Manual

Manage Device Security
511
M4300 Series and M4300-96X Fully Managed Switches User Manual
13. Click the Apply button.
Your settings are saved.
The Authentication List field displays the authentication list for HTTPS.
Manage Certificates
You can generate or delete certificates.
 To manage certificates:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security >
Access > HTTPS > Certificate Management.
The Certificate Present field displays whether there is a certificate present on the
device.
6. Select one of the following radio buttons:
• None
. There is nothing to be done with respect to certificate management. This is the
default selection.
• Generate Certificates
. Begin generating the certificate files.
• Delete Certificates. Delete the corresponding certificate files, if present.
7. Click the Apply button.
Your settings are saved.
The Certificate Generation Status field displays the SSL certificate generation status.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)