NETGEAR M4300 - View Ipv6 MLD Routing Interface Statistics

Multicast Routing
448
M4300 Series and M4300-96X Fully Managed Switches User Manual
15. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
View IPv6 MLD Routing Interface Statistics
 To view the IPv6 multicast MLD routing interface statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> IPv6 Multicast > MLD > Routing Interface Statistics.
6. T
o refresh the page with the latest information on the switch, click the Update
button.
Table 172. IPv6 MLD Routing Interface Configuration
Field Description
Operational Mode The operational status of MLD on the Interface.
Robustness The robustness parameter for the selected interface. This variable allows
tuning for the expected packet loss on a subnet. If a subnet is expected to
be lossy, the robustness variable can be increased. MLD is robust to
robustness variable –1 packet losses.
The default value is 2.