Multicast Routing
412
M4300 Series and M4300-96X Fully Managed Switches User Manual
Search for DVMRP Neighbors
To search for DVMRP neighbors:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> Multicast > DVMRP > DVMRP Neighbor.
6. Use the Search menu to search for neighbor entries by MAC interface or neighbor IP
address:
• Select Interface from the menu, enter the interface in unit/slot/port format (for
example 1/0/13), and click the Go button.
If the neighbor entry exists, the entry is displayed as the first entry
, followed by the
remaining entries.
• Select Neighbor IP from the menu, enter the neighbor IP address, and click the Go
button.
If the entry with the matching neighbor IP exists, the entry is displayed as the first
entry, followed by the remaining entries. An exact match is required.
The following table describes the nonconfigurable information that is displayed.
Table 153. DVMRP Neighbor
Field Description
Interface Select the interface for which data is to be displayed, or all the
interfaces are displayed.
Neighbor IP The IP address of the neighbor whose information is displayed
State The state of the specified neighbor router on the selected interface,
either active or down.
Up Time The DVMRP uptime for the specified neighbor on the selected
interface.
This is the time since the neighbor entry was learned.
To Next Page
Loading...
