Manage Device Security
544
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. Use one of the following methods to select a port:
• In the Go To Port
field, enter the interface in the unit/slot/port format and click on the
Go button.
• Next to the Port column, select the check box for the port that you want to configure,
select multiple check boxes to apply the same setting to all selected ports, or select
the check box in the table heading to apply the same settings to all ports.
7. Specify the following settings:
• Security Mode. Enables or disables the port security feature for the selected
interface.
• Max Allowed Dynamically Learned MAC. Sets the maximum number of dynamically
learned MAC addresses on the selected interface.
• Max Allowed Statically Locked MAC. Sets the maximum number of statically locked
MAC addresses on the selected interface.
• Violation Traps. Enables or disables the sending of new violation traps designating
when a packet with a disallowed MAC address is received on a locked port.
8. Click the Apply
button.
Your settings are saved.
Convert Learned MAC Addresses to Static Addresses
You can convert a dynamically learned MAC address to a statically locked address.
To convert learned MAC addresses and view the learned MAC addresses for an
interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
To Next Page
Loading...
