Multicast Routing
410
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. Select the Admin Mode Disable or Enable radio button.
This sets the administrative status of DVMRP to active or inactive. The default is Disable.
7. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Configure the DVMRP Interface
To configure the multicast DVMRP interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> Multicast > DVMRP > Interface Configuration.
Table 151. DVMRP Global Configuration
Field Description
Version The current value of the DVMRP version string.
Total Number of Routes The number of routes in the DVMRP routing table.
Reachable Routes The number of routes in the DVMRP routing table that use a
non-infinite metric.
To Next Page
Loading...
