OSPF and OSPFv3
380
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. Select the Default Information Originate Enable radio button.
Selecting Enable makes it possible to specify the other settings on this page. Selecting
Disable returns the other fields on this page to their default values.
7. Select the Always True
or False radio button.
When set to True, this field sets the router advertise. The default is False.
8. In the Metric field, specify the metric of the default route.
The valid values range from 0 to 16777214. The default is 0.
9. Select the Metric T
ype External T
ype 1 or External Type 2 radio button.
This sets the OSPFv3 metric type of the default route. The default is External Type 2.
10. Click the Apply button.
Your settings are saved.
Configure the Advanced OSPFv3 Settings
To configure the advanced OSPFv3 settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
To Next Page
Loading...
