NETGEAR M4300 - View and Clear the Event Log

Monitor the System
639
M4300 Series and M4300-96X Fully Managed Switches User Manual
View and Clear the Event Log
You can view and clear the event log, which contains error messages from the system. The
event log is not cleared on a system reset.
 To view and clear the event log:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Monitoring > Logs > Event Logs.
6. T
o clear the messages from the Event Log, click the Clear
button.
The following table describes the event log information displayed on the page.
Table 223. Event Logs
Field Description
Entry The sequence number of the event.
Type The type of the event.
File Name The file in which the event originated.
Line The line number of the event.
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.