Configure System Information
97
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure DHCP Pool Options
To configure DHCP Pool options:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
Days The number of days of the lease period. This field appears only if the
user specified Specified Duration as the Lease time. The default
value is 1. The valid range is 0 to 59.
Hours The number of hours of the lease period. This field appears only if the
user specified Specified Duration as the Lease time.
The valid range
is 0 to 22.
Minutes The number of minutes of the lease period.
This field appears only if
you specified Specified Duration as the lease time.
The valid range is
0 to 86399.
Default Router
Addresses The list of Default Router
Addresses
for the pool. Click the arrow
beside the field name to expand the page and display a table where
you can specify up to eight default router addresses in order of
preference.
DNS Server Addresses The list of DNS Server
Addresses for the pool. Click the arrow beside
the field name to expand the page and display a table where you can
specify up to eight DNS Server
Addresses in order of preference.
NetBIOS Name Server Addresses The list of NetBIOS Name Server
Addresses for the pool. Click the
arrow beside the field name to expand the page and display a table
where you can specify up to eight NetBIOS name server addresses in
order of preference.
NetBIOS Node
Type The NetBIOS node type for DHCP clients:
• b-node Broadcast
• p-node Peer-to-Peer
• m-node Mixed
• h-node Hybrid
Next Server Address The Next Server
Address for the pool.
Domain Name The domain name for a DHCP client. Domain Name
can be up to 255
characters in length.
Bootfile The name of the default boot image for a DHCP client. File Name can
be up to 128 characters in length.
Table 34. DHCP Pool Configuration (continued)
Field Description
To Next Page
Loading...
