Configure System Information
96
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the DHCP Pool Configuration fields.
Table 34. DHCP Pool Configuration
Field Description
Pool Name* For a user with read/write permission, this field shows names of all the
existing pools along with an additional option Create. When the user
selects Create, another text box Pool Name, appears where the user
can enter a name for the pool to be created. For a user with read-only
permission, this field shows names of the existing pools only
.
Pool Name The name of the pool to be created.
This field appears when the user
with read-write permission selects Create in the Pool Name list*. Pool
Name can be up to 31 characters in length.
Type of Binding The type of binding for the pool:
• Unallocated
• Dynamic
• Manual
Network Address The subnet address for a DHCP address of a dynamic pool.
Network Mask The subnet number for a DHCP address of a dynamic pool. Either
Network Mask or Prefix Length can be configured to specify the
subnet mask but not both.
Network Prefix Length The subnet number for a DHCP address of a dynamic pool. Either
Network Mask or Prefix Length can be configured to specify the
subnet mask but not both.
The valid range is 0 to 32.
Client Name The client name for DHCP manual pool.
Hardware Address The MAC address of the hardware platform of the DHCP client.
Hardware Address
Type The protocol of the hardware platform of the DHCP client. Valid types
are Ethernet and ieee802.
The default value is Ethernet.
Client ID The client identifier for DHCP manual pool.
Host Number The IP address for a manual binding to a DHCP client.
The host can be
set only if f Client Identifier or Hardware
Address is specified. Deleting
Host would delete the client name, client ID, and hardware address for
the manual pool, and set the pool type to Unallocated.
Host Mask The subnet mask for a manual binding to a DHCP client. Either
Host
Mask or Prefix Length can be configured to specify the subnet mask
but not both.
Host Prefix Length The subnet mask for a manual binding to a DHCP client. Either Host
Mask or Prefix Length can be configured to specify the subnet mask
but not both.
The valid range is 0 to 32.
Lease T
ime Can be selected as Infinite to specify lease time as Infinite or
Specified Duration to enter a specific lease period. In case of dynamic
binding infinite implies a lease period of 60 days and In case of manual
binding infinite implies indefinite lease period.
The default value is
Specified Duration.
To Next Page
Loading...
