Configure Switching Information
207
M4300 Series and M4300-96X Fully Managed Switches User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > iSCSI > Advanced > iSCSI T
argets.
6. In the TCP Port field, specify the TCP port for the target that monitors iSCSI traf
fic.
Up to 16 TCP ports can be defined in the system. The well-known iSCSI ports 860 and
3260 are configured as defaults but you can remove them as any other configured target.
7. In the IP address field, specify an IP address for the target that monitors iSCSI traffic.
The default is 0.0.0.0.
8. In the
Target Name field, specify a name to assign to the target.
The iSCSI
Target Name can be up to 233 characters in length.
9. Click the Add
button.
The iSCSI targets configuration is added.
View iSCSI Sessions
To view information about active iSCSI sessions:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > iSCSI >
Advanced > Sessions.
To Next Page
Loading...
