Multicast Routing
435
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure the PIM Static Rendezvous Point
You can statically configure the rendezvous point (RP) address for one or more multicast
groups.
To configure the PIM static RP:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> Multicast > PIM > Static RP Configuration.
6. In the RP Address field, enter the IP address for one or more multicast groups.
7. In the Group Address field, enter the group address of the RP
.
8. Enter the
Group Mask of the RP to be created or deleted.
9. In the Override field, select Enable or Disable.
Enable indicates that, if there is a conflict, the RP configured with this option prevails
over the RP learned by BSR.
10. Click the Add button.
The static RP address is added for one or more multicast groups
11. Click the Apply button.
Your settings are saved.
Configure Multicast Static Routes
To configure multicast static routes:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
To Next Page
Loading...
