Configure System Information
65
M4300 Series and M4300-96X Fully Managed Switches User Manual
Time
The switch software supports the Simple Network Time Protocol (SNTP). As its name
suggests, it is a less complicated version of Network Time Protocol, which is a system for
synchronizing the clocks of networked computer systems, primarily when data transfer is
handled through the Internet.
Configure the Time Setting
To configure the time setting:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Management > T
ime > T
ime Configuration.
6. Select the Clock Source Local or SNTP radio button.
The default is SNTP. The local clock can be set to SNTP only if the following two
conditions are met:
• The SNTP server is configured.
• The SNTP last attempt status is successful.
7. In the Date field, specify the current date in months, days, and years.
8. In the T
ime field, specify the current time in hours, minutes, and seconds.
9. Click the Apply
button.
Your settings are saved.
To Next Page
Loading...
