Manage Device Security
538
M4300 Series and M4300-96X Fully Managed Switches User Manual
View the Client Summary
To view the client summary:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
VLAN Assigned The VLAN ID assigned to the selected interface by the authenticator. This field is
displayed only when the port control mode of the selected interface is not
MAC-based. This field is not configurable.
VLAN Assigned Reason The reason for the VLAN ID assigned by the authenticator to the selected
interface.
This field is displayed only when the port control mode of the selected
interface is not MAC-based.
This field is not configurable. Possible values are as
follows:
• Radius
• Unauth
• Default
• Not Assigned
Key Transmission Enabled This field displays if key transmission is enabled on the selected port. This is not a
configurable field.
The possible values are
True and False. If the value is False,
key transmission does not occur. Otherwise, key transmission is supported on the
selected port.
Session Timeout The session timeout set by the RADIUS server for the selected port. This field is
displayed only when the port control mode of the selected port is not MAC-based.
Session Termination Action The termination action set by the RADIUS server for the selected port. This field is
displayed only when the port control mode of the selected port is not MAC-based.
Possible values are as follows:
• Default
• Reauthenticate
If the termination action is set to default, then at the end of the session, the client
details are initialized. Otherwise re-authentication is attempted.
Port Status The authorization status of the specified port. The possible values are Authorized,
Unauthorized, and N/A. If the port is in detached state, the value is N/A because
the port cannot participate in port access control.
Table 195. Port Summary (continued)
Field Description