NETGEAR M4300 - Upload or Export a File from the Switch; Upload a File to the TFTP Server

Maintenance and Troubleshooting
659
M4300 Series and M4300-96X Fully Managed Switches User Manual
Upload or Export a File From the Switch
You can upload configuration (ASCII), log (ASCII), and image (binary) files from the switch to
the TFTP server.
Upload a File to the TFTP Server
 To upload a file from the switch to the TFTP server:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Maintenance > Export > File Export.
6. Use File T
ype
to specify what type of file to upload:
• CLI Banner. Specify CLI Banner to retrieve the CLI banner file.
• Text Configuration. Specify configuration in text mode to retrieve the stored
configuration.
• Script File. Specify Script file to retrieve the stored configuration.
• Error Log. Specify Error log to retrieve the system error (persistent) log, sometimes
referred to as the event log.
• T
rap Log. Specify Trap log to retrieve the system trap records.
• Buffered Log. Specify Buffered Log to retrieve the system buf
fered (in-memory) log.
• Tech Support. Specify Tech Support to retrieve the switch information needed for
trouble-shooting.
• Crash Logs. Specify Crash Log to retrieve the crash logs.