EasyManuals Logo

NETGEAR M4300 User Manual

NETGEAR M4300
704 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #575 background imageLoading...
Page #575 background image
Manage Device Security
575
M4300 Series and M4300-96X Fully Managed Switches User Manual
Set Up Captive Portals
The captive portal feature allows you to prevent clients from accessing the network until user
verification is established. You can configure captive portal verification to allow access for
both guest and authenticated users. Authenticated users must be validated against a
database of authorized captive portal users before access is granted. The database can be
stored locally on the device or on a RADIUS server.
Configure Captive Portal Global Settings
You can control the administrative state of the captive portal feature, and configure global
settings that affect all captive portals configured on the switch.
To configure captive portal global settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
DHCP Permits Number of ARP packets that were forwarded by DAI because there is a
matching DHCP snooping binding entry found.
ACL Drops Number of ARP packets that were dropped by DAI because there is no
matching ARP
ACL rule found for this VLAN and the static flag is set on
this VLAN.
ACL Permits Number of ARP packets that were permitted by DAI because there is a
matching
ARP
ACL rule found for this VLAN.
Bad Source MAC Number of ARP packets that were dropped by DAI because the sender
MAC address in ARP packets didn't match the source MAC in Ethernet
header
.
Bad Dest MAC Number of ARP packets that were dropped by DAI because the target
MAC address in
ARP reply packets didn't match the destination MAC in
Ethernet header
.
Invalid IP Number of ARP packets that were dropped by DAI because the sender
IP address in
ARP packets or the target IP address in
ARP reply
packets is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255,
IP multicast addresses, class E addresses (240.0.0.0/4), loopback
addresses (127.0.0.0/8).
Forwarded Number of valid ARP packets forwarded by DAI.
Dropped Number of invalid ARP packets dropped by DAI.
Table 208. DAI Statistics (continued)
Field Description

Table of Contents

Other manuals for NETGEAR M4300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4300 and is the answer not in the manual?

NETGEAR M4300 Specifications

General IconGeneral
ModelM4300
Form FactorRack-Mountable
LayerLayer 3
StackableYes
ManagedYes
MemoryVaries by model
Flash MemoryVaries by model
WarrantyLifetime
PortsVaries by model (24 or 48 ports)
PoEAvailable on some models
Port Speed10/100/1000 Mbps, 10Gbps on uplinks
Forwarding RateVaries by model
Jumbo Frame SupportYes
VLAN SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, 802.1X
DimensionsVaries by model
WeightVaries by model
Operating Temperature0° to 50° C (32° to 122° F)
Power SupplyInternal
Uplink PortsVaries by model (SFP/SFP+ or 10G SFP+)

Related product manuals