Configure Switching Information
212
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable fields.
Configure Advanced STP Settings
To configure advanced STP settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > STP >
Advanced > STP Configuration.
Table 73. STP Configuration
Field Description
Configuration Digest Key Identifier used to identify the configuration currently being used.
Configuration Format Selector The version of the configuration format being used in the exchange of
BPDUs.
MST ID Table consisting of the MST instances (including the CST) and the
corresponding VLAN IDs associated with each of them.
VID ID Table consisting of the VLAN IDs and the corresponding FID
associated with each of them.
FID ID Table consisting of the FIDs and the corresponding VLAN IDs
associated with each of them.
To Next Page
Loading...
