Routing
330
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure RIP
Enable RIP
To enable RIP:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > RIP > Basic > RIP Configuration.
6. In the RIP Admin
Mode field, select the Enable
or Disable option.
If you select Enable, RIP is activated for the switch. The default is Enable.
7. Click the Apply
button.
Your settings are saved.
Configure RIP Settings
To configure advanced RIP settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Active Static Entries Total number of active static entries in the ARP table.
Configured Static Entries Total number of configured static entries in the ARP table.
Maximum Static Entries Maximum number of static entries that can be defined.
Table 118. ARP Table Configuration
Field Description
To Next Page
Loading...
