NETGEAR M4300 User Manual

Configure System Information
106
M4300 Series and M4300-96X Fully Managed Switches User Manual
5. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Interface Statistics.
The following table describes the DHCP L2 Relay Interface Statistics fields.
Configure UDP Relay Global Settings
 To configure UDP relay global settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Services > UDP Relay > UDP Relay Global Configuration.
Table 39. DHCP L2 Relay Interface Statistics
Field Description
Interface Shows the interface from which the DHCP message is received.
UntrustedServerMsgsWithOpt82 Shows the number of DHCP message with option82 received from an
untrusted server.
UntrustedClientMsgsWithOpt82 Shows the number of DHCP message with option82 received from an
untrusted client.
T
rustedServerMsgsWithoutOpt82 Shows the number of DHCP message without option82 received from a
trusted server
.
T
rustedClientMsgsWithoutOpt82 Shows the number of DHCP message without option82 received from a
trusted client.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)