NETGEAR M4300 User Manual

Configure Switching Information
265
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure Expandable Port Settings
You can view and configure the expandable ports.
 To view and configure expandable ports information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching > Ports > Expandable Port Configuration.
The nonconfigurable Operational Port(s) column displays the ports that are operational.
6. In the 40G Interface column, select the check box for the interface.
7. From the Configured Mode menu, select the expandable port mode:
• 1x40G.
The interface is not expanded and functions in 40 mode.
This is the default
setting.
• 4x10G. The interface is expanded to four 10G ports.
8. Click the Apply
button.
Your settings are saved.
9. T
o refresh the page with the latest information on the switch, click the Update
button.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)