NETGEAR M4300 - Configure and View Information about Slots and Port Cards

Configure System Information
48
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the USB Directory Details information.
Configure and View Information About Slots and Port Cards
You can configure information about the port cards that are installed in the switch’s slots and
view information about the port cards and other switches that are compatible with the switch.
 To configure and view information about slots and port cards:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Management > Slot Information.
6. For model M4300-96X only
, from the Administrative State menu, select
Enable or
Disable.
By default, all slots are enabled, but you can select to disable a slot.
7. For model M4300-96X only, from the Configured Card Model ID menu, select the port
card.
This option allows you to preconfigure the port card before you insert the port card.
Table 13. USB Directory Details information
Field Description
File Name The name of the file stored in the USB flash drive.
File Size The size of the file stored in the USB flash drive in bytes
Modification Time The last modification time of the file stored in the USB flash drive.