NETGEAR M4300 - View the PIM Candidate Rendezvous Point; View the PIM Neighbor

Multicast Routing
431
M4300 Series and M4300-96X Fully Managed Switches User Manual
View the PIM Candidate Rendezvous Point
 To view the multicast PIM candidate rendezvous point (RP):
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> Multicast > PIM > Candidate RP Configuration.
The following table describes the nonconfigurable information that is displayed.
View the PIM Neighbor
 To view the multicast PIM neighbor:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Table 165. Multicast PIM Neighbor
Field Description
Field Description
Interface The interface on which the neighbor is displayed.
Neighbor IP The IP address of the PIM neighbor for this entry.
Up Time (hh:mm:ss) The time since this PIM neighbor (last) became a neighbor of the local
router
.
Expiry T
ime (hh:mm:ss) The minimum time remaining before this PIM neighbor is aged out.