Routing
318
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. In the IPv6 Prefix field, specify the IPv6 prefix for the configured route.
7. In the Prefix Length field, specify the IPv6 prefix length for the configured route.
8. In the Next Hop IPv6
Address T
ype list, select one of the following options:
• Global IPv6 Address.
• Link-Local
IPv6 address. If the next hop IPv6 address specified is a link-local IPv6
address, then specify the interface for the link-local IPv6 next hop address.
• Static-Reject. Select Static-Reject to create a static-reject route for a destination
prefix. No next hop address is specified in that case.
9. Enter the Next Hop IPv6
Address
for the configured route.
10. Select from the Interface list to specify in unit/slot/port format, the link-local IPv6 next hop
address.
This field is enabled only if Link-Local is selected.
11. Specify the route Preference of the configured route.
12. Click the Add button.
The route is added.
View the IPv6 Route Table
To view the IPv6 route table:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> IPv6 >
Advanced > Route T
able.
To Next Page
Loading...
