Configure Switching Information
186
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable information displayed on the page.
View VLAN Status
You can view the status of all currently configured VLANs.
To view the VLAN status:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Switching> VLAN >
Advanced > VLAN Status
.
Table 65. Advanced VLAN Membership
Field Definition
VLAN Name The name for the VLAN that you selected. It can be up to 32
alphanumeric characters long, including blanks. VLAN ID 1 always
uses the name Default.
VLAN Type The type of the VLAN you selected:
• Default (VLAN ID = 1).
Always present
• Static
. A VLAN
that you configured
• Dynamic. A VLAN created by GVRP registration that you did not
convert to static, and that GVRP can therefore remove
To Next Page
Loading...
