Configure Switching Information
185
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. In the VLAN ID list, select the VLAN ID.
7. In the Group Operation list, select all the ports and configure them:
• Untag All. Select all the ports on which all frames transmitted for this VLAN are
untagged. All the ports are included in the VLAN.
• Tag All. Select the ports on which all frames transmitted for this VLAN are tagged. All
the ports are included in the VLAN.
• Remove All. All the ports that can be dynamically registered in this VLAN through
GVRP
. This selection excludes all ports from the selected VLAN.
8. In the Port display, select port numbers to add them to this VLAN.
Each port can use one of three modes:
• T (Tagged). Select the ports on which all frames transmitted for this VLAN are tagged.
The ports that are selected are included in the VLAN.
• U (Untagged)
. Select the ports on which all frames transmitted for this VLAN are
untagged. The ports that are selected are included in the VLAN.
• BLANK (Autodetect). Select the ports that can be dynamically registered in this
VLAN through GVRP.
This selection excludes a port from the selected VLAN.
9. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
