Manage Device Security
515
M4300 Series and M4300-96X Fully Managed Switches User Manual
12. Use Enable Authentication List to select an authentication list.
This list is used to authenticate users who try to get enable level privilege.
13. Use SSH Port to enter the port range from 1 to 65535.
The default value is 22.
14. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable fields that display on the page.
Manage Host Keys
You can generate or delete RSA and DSA keys.
To manage host keys:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security >
Access > SSH > Host Keys Management.
Table 191. SSH Configuration
Field Description
Current Number of SSH Sessions The number of active SSH sessions between remote SSH clients and the
SSH server on the device.
Keys Present Displays Ye
s or No
whether one or both (if any) of the following keys
are present on the device:
• SSH-1 Rivest-Shamir-Adelman (RSA) key file or SSH-2 RSA key
file (PEM encoded)
• SSH-2 Digital Signature
Algorithm (DSA) key file (PEM encoded)
To Next Page
Loading...
