NETGEAR M4300 - Configure Basic Sflow Agent Information

Monitor the System
649
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure Basic sFlow Agent Information
 To configure basic sFlow agent information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Monitoring> sFlow > Basic > sFlow
Agent Information.
6. In the
Source Interface list, select the management interface that is used for sFlow Agent.
Possible values are as follows:
• None
• Routing interface
• Routing VLAN
• Routing loopback interface
• T
unnel interface
• Service port
By default, VLAN 1 is used as the source interface.
7. Click the Apply
button.
Your settings are saved.