Monitor the System
636
M4300 Series and M4300-96X Fully Managed Switches User Manual
By default, VLAN 1 is used as source interface.
9. Use the USB Filename field to specify the name of the USB file. The filename cannot
include the following symbols: V
:*?”<>!. Up to 64 characters can be entered. The 64
characters are only the filename length, the extension is automatically added. The default
value is blank.
10. Click the Apply button.
Your settings are saved.
Note: Syslog can write the log messages simultaneously to a remote server
and the USB storage device.
Configure the Syslog Host Settings
To configure the syslog host settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Monitoring > Logs > Syslog Configuration.
6. In the Host Configuration section, configure the following settings:
To Next Page
Loading...
