NETGEAR M4300 User Manual

Manage Device Security
566
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. From the Interface menu, select the interface.
7. In the MAC Address field, type the MAC address for the binding.
8. From the VLAN ID menu, select the VLAN for the binding rule.
9. In the IP Address field, specify valid IP address for the binding rule.
10. Click the Add button.
The IPSG static binding entry is added into the database.
The following table describes the nonconfigurable IP Source Guard dynamic binding
configuration information that is displayed.
Configure IPv6 Source Guard Interface Settings
 To configure IPv6 source guard Interface settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
Table 206. IP Source Guard Dynamic Binding Configuration
Field Description
Interface The interface for which to add a binding into the IPSG database.
MAC Address The MAC address for the binding entry.
VLAN ID The VLAN for the binding entry.
IP Address Displays valid IP address for the binding entry.
Filter Type Filter type used on the interface. One is source IP address filter type,
and the other is source IP address and MAC address filter type.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)