Manage Device Security
568
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure an IPv6 Source Guard Binding
To configure an IPv6 source guard static binding:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Control > IPv6 Source Guard > Binding Configuration.
6. From the Interface menu, select the interface to add a binding into the IPv6SG database.
7. In the MAC Address field, specify the MAC address for the binding.
8. From the VLAN ID menu, select the VLAN from the list for the binding rule.
9. In the IPv6 Address field, specify valid IP address for the binding rule.
10. Click the Add button.
The IPv6SG static binding entry is added to the database.
The following table describes the nonconfigurable IPv6 Source Guard dynamic binding
configuration information that is displayed.
Table 207. IPv6 Source Guard Dynamic Binding Configuration
Field Description
Interface The interface to add a binding into the IPSG database.
MAC Address The MAC address for the binding entry.
VLAN ID The VLAN for the binding entry.
To Next Page
Loading...
