NETGEAR M4300 User Manual

Configure System Information
114
M4300 Series and M4300-96X Fully Managed Switches User Manual
View DHCPv6 Bindings Information
You can view entries in the DHCP Bindings table. After a client acquires IPv6 configuration
information from the DHCPv6 server, the server adds an entry to its database. The entry is
called a binding.
 To view DHCPv6 bindings information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Services > DHCPv6 Server > DHCPv6 Bindings Information.
6. T
o refresh the page, click the Update button.
The following table describes the nonconfigurable fields that are displayed.
Table 40. DHCPv6 Binding Information
Field Description
Client Address The IPv6 address of the client associated with the binding.
Client Interface The interface number where the client binding occurred.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)