Configure System Information
113
M4300 Series and M4300-96X Fully Managed Switches User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Services > DHCPv6 Server > DHCPv6 Interface Configuration.
6. Select the Interface with the information to view or configure.
Y
ou can either:
a. In the Go To Interface field, enter the interface in unit/slot/port format and c
lick the Go
button. The entry corresponding to the specified interface is selected.
b. Select the check box from the list of Interfaces configured for DHCPv6 server
functionality.
7. In the Admin mode
list, select to Enable or Disable DHCPv6 mode to configure server
functionality.
DHCPv6 server and DHCPv6 relay functions are mutually exclusive.
8. In the
Pool Name field, specify the DHCPv6 pool containing stateless and/or prefix
delegation parameters.
9. Rapid Commit is an optional parameter
. In the Rapid Commit list, select to
Enable or
Disable allowing an abbreviated exchange between the client and server.
10. In the Preference field, specify the preference value used by clients to determine the
preference between DHCPv6 servers.
Valid values are 0 to 4294967295. The default value is 0.
11. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
