Configure System Information
47
M4300 Series and M4300-96X Fully Managed Switches User Manual
View USB Device Information
To display the USB device information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > Management > USB Device Information.
The Device Status field displays the current status of the device. The status is one of the
following:
• Active.
The device is USB plugged in and recognized by the switch.
• Inactive. The device is not mounted.
• Invalid
. The device is not present or an invalid device is plugged in.
6. To refresh the page, click the Update button.
The following table describes the USB Memory Statistics information.
Table 12. USB Memory Statistics information
Field Description
Total Size The USB flash device storage size in bytes.
Bytes Used The size of memory used on the USB flash device.
Bytes Free The size of memory free on the USB flash device.
To Next Page
Loading...
