Multicast Routing
438
M4300 Series and M4300-96X Fully Managed Switches User Manual
5. Select Routing > IPv6 Multicast > Mroute Table.
6. To refresh the page with the latest information on the switch, click the Update
button.
The following table describes the nonconfigurable information that is displayed.
Configure the IPv6 PIM Global Settings
To configure the IPv6 PIM global settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
Table 168. Multicast Mroute Table
Field Description
Group IP The destination group IP address.
Source IP The IP address of the multicast packet source to be combined with the
group IP to fully identify a single route whose Mroute table entry.
Incoming Interface The incoming interface on which multicast packets for this source/group
arrive.
Outgoing Interfaces The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
Up T
ime (hh:mm:ss) The time in seconds since the entry was created.
Expiry Time (hh:mm:ss) The time in seconds before this entry ages out and is removed from the
table.
RPF Neighbor The IP address of the reverse path forwarding (RPF) neighbor.
Protocol The multicast routing protocol which created this entry. The possible values
are as follows:
• PIM-DM
• PIM-SM
Flags The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM.
The possible values are
RPT or SPT. For other
protocols a – (hyphen) is displayed.
To Next Page
Loading...
