Configure System Information
131
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the SNMP Supported MIBs Status fields.
Configure SNMP V3 Users
To configure SNMPv3 settings for the user account:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select System > SNMP > SNMP V3 > User Configuration.
Table 44. SNMP Supported MIBs
Field Description
Name The RFC number if applicable and the name of the MIB.
Description The RFC title or MIB description.
To Next Page
Loading...
