Configure Switching Information
206
M4300 Series and M4300-96X Fully Managed Switches User Manual
View iSCSI Sessions
To view active iSCSI session information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. click Switching > iSCSI > Basic > Sessions.
6. T
o refresh the page with the latest information on the switch, click the Update
button.
The following table describes the nonconfigurable iSCSI Sessions information.
Control iSCSI Target Settings
You can view iSCSI targets and assign target ports/port IP address combinations for iSCSI
optimization on the switch.
To configure iSCSI target settings
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
Table 70. iSCSI Sessions
Field Description
Target Name The target’s name.
Initiator Name The initiator’s name.
Initiator Session ID (ISID) The iSCSI identifier.
To Next Page
Loading...
