NETGEAR M4300 - Configure an HTTPS Authentication List

Manage Device Security
506
M4300 Series and M4300-96X Fully Managed Switches User Manual
Configure an HTTPS Authentication List
You can configure an HTTPS list. A login list specifies the authentication methods to validate
the switch or port access through HTTPS for the users associated with the list. The default
list is httpsList.
 To configure an HTTPS authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > Management Security >
Authentication List > HTTPS
Authentication
List.
6. Select the check box for the HTTPS list name.
7. In the columns in table header (1, 2, 3, 4, 5, 6), select the method to appear first in the
selected authentication enable list.
The options are as follows:
- Enable.
The privileged EXEC password is used for authentication.
- None
. The user cannot be authenticated.