NETGEAR M4300 - Page 505

Manage Device Security
505
M4300 Series and M4300-96X Fully Managed Switches User Manual
The System Information page displays.
5. Select Security > Management Security > Authentication List > HTTP
Authentication
List.
6. Select the check box for the HTTP list name.
7. In the columns in table header (1, 2, 3, 4, 5, 6), select the method to appear first in the
selected authentication enable list.
The options are as follows:
- Enable. The privileged EXEC password is used for authentication.
- None
. The user cannot be authenticated.
- RADIUS. The user's name and password are authenticated using the RADIUS server
instead of local server
.
- TACACS.
The user's name and password are authenticated using the TACACS
server.
8. Click the Apply button.
Your settings are saved.