Multicast Routing
434
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. From the list of interfaces, select the Interface.
7. Enter the C-BSR Hash Mask Length to be advertised in bootstrap messages.
This hash mask length is used in the hash algorithm for selecting the RP for a particular
group.
The valid values are from 0 to 32.
The default value is 30.
8. In the Priority field, enter the priority of C-BSR.
9. Enter the Advertisement Interval value of the C-BSR in seconds.
The default value is 60.
10. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Table 167. Multicast BSR Candidate Configuration
Field Description
BSR Expiry Time (hh:mm:ss) Time (in hours, minutes and seconds) in which the learned elected
bootstrap router (BSR) expires.
IP Address The IP address of the elected BSR.
Next bootstrap Message
(hh:mm:ss)
Time (in hours, minutes, and seconds) in which the next bootstrap
message is due from this BSR.
Next Candidate RP Advertisement
(hh:mm:ss)
Time (in hours, minutes, and seconds) in which the next candidate RP
advertisement is sent.
To Next Page
Loading...
