NETGEAR M4300 User Manual

Configure System Information
45
M4300 Series and M4300-96X Fully Managed Switches User Manual
6. To clear all the counters, resetting all switch summary and detailed statistics to default
values, click the Clear button.
The discarded packets count cannot be cleared.
The following table describes Switch Statistics information.
Table 11. Switch Statistics information
Field Description
ifIndex The ifIndex of the interface table entry associated with the processor of
this switch.
Octets Received The total number of octets of data received by the processor (excluding
framing bits but including FCS octets).
Packets Received Without Errors The total number of packets (including broadcast packets and multicast
packets) received by the processor
.
Unicast Packets Received The number of subnetwork-unicast packets delivered to a higher-layer
protocol.
Multicast Packets Received The total number of packets received that were directed to a multicast
address.
This number does not include packets directed to the
broadcast address.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)