Monitor the System
642
M4300 Series and M4300-96X Fully Managed Switches User Manual
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Monitoring > Mirroring > Multiple Port Mirroring.
6. In the Source Interface Configuration section, select which interfaces are displayed on the
page:
• Select Unit ID to display the physical ports of the selected unit.
• Select LAG to display a list of LAGs only
.
• Select
CPU to display a list of CPUs only.
• Select
VLANs to display a list of available VLANs.
• Select All to display a list of all physical ports, LAG, CPU, and VLANs.
7. Use one of the following methods to select an interface:
• In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the
Go button.
• Next to the Interface column, select the check box for the interface or interfaces that
you want to include.
8. In the Direction field, specify the direction of the traffic to be mirrored from the configured
mirrored ports.
If the value is not configured, it is shown as None.
The default value is None. Direction
options are as follows:
• None.
The value is not configured.
• Tx and Rx
. Monitors transmitted and received packets.
To Next Page
Loading...
