NETGEAR M4300 - Page 471

Configure Quality of Service
471
M4300 Series and M4300-96X Fully Managed Switches User Manual
 To configure the global DiffServ mode:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select QoS > DiffServ >
Advanced > Diffserv Configuration
.
6. Select the administrative mode for DiffServ:
• Enable
. Differentiated Services are active.
• Disable
. The Dif
fServ configuration is retained and can be changed, but it is not
active.
7. Click the Apply button.
Your settings are saved.
The following table describes the information displayed in the Status table on the DiffServ
Configuration page.
Table 181. DiffServ Status
Field Description
Class Table The number of configured DiffServ classes out of the total allowed on
the switch.
Class Rule table The number of configured class rules out of the total allowed on the
switch.